Kubota Loader LA434

Main Frame Bolt and Nut Torque Check

Check the following bolts and nuts for tightness

Enter the tightening torque for M14 bolts

Enter the tightening torque for M12 bolts (pitch 1.75)

Enter the tightening torque for M12 bolts

Enter the tightening torque for M12 nuts

Are all bolts and nuts tightened to the specified torque?

Re-tighten all mounting bolts and nuts to the required torque value

Ensure the tractor is on a flat surface with the bucket on the ground, engine shut off, key removed, and parking brake on.

Check the tractor hydraulic fluid level.

Is the hydraulic fluid level adequate?

Add hydraulic fluid if necessary, as described in the tractor's operator's manual.

Change the filter element and hydraulic fluid as recommended in the tractor's operator's manual.

Check all hardware for tightness.

Ensure the tractor is on a flat surface.

Lower the bucket to the ground.

Remove the key from the ignition.

Lubricate joints of control lever linkage.