Nordson Jet Cleaner BKG JCP-Mini-2424 JetCleaner

Ensure power supply is off and locked against accidental switch-on.

Wear personal protective equipment (full face mask, temperature–resistant gloves, and protective clothing).

Ensure sufficient space above the excess pressure relief valve and above the cleaning chamber.

Check and clean all vacuum sealing surfaces and the seals at the excess pressure valves.

Check that the control thermocouple is firmly installed in the well.

Check that the well of the control thermocouple does not have any air holes and is protected from the chamber heater module and the chamber insert.

Check that the spring-loaded over-temperature thermocouple is firmly installed in the well.

Ensure power supply is off and locked against accidental switch-on.

Wear personal protective equipment (full face mask, temperature–resistant gloves, and protective clothing).

Ensure sufficient space above the excess pressure relief valve and above the cleaning chamber.

Check and clean all vacuum sealing surfaces and the seals at the excess pressure valves.

Allow the oven and cleaned parts to cool down after cleaning cycle completion.

Clean the primary condensation trap collector pan(s) after each cleaning cycle.

Use a lining of aluminum foil in the Collector Pan to ease material removal.

Ensure power supply is off and locked against accidental switch-on.

Wear personal protective equipment (full face mask, temperature–resistant gloves, and protective clothing).

Use safe lift trucks and transport devices operated by trained personnel.

Ensure excess pressure relief valve is operable and has sufficient space above it.

Vacuum Pump Inspection and Maintenance

Check and clean all vacuum sealing surfaces and seals at the excess pressure valves regularly.

Inspect for any damage to vacuum sealing surfaces.

Inspect for any damage to the excess pressure relief valve.

Ensure power supply is off and locked against accidental switch-on.

Wear personal protective equipment (full face mask, temperature–resistant gloves, and protective clothing).

Ensure sufficient space above the excess pressure relief valve and above the cleaning chamber.

Check and clean all vacuum sealing surfaces and the seals at the excess pressure valves.

Ensure all safety devices are functional and not impaired.

Verify that the excess pressure relief valve is operable.

Spray Nozzle Functionality Check

Ensure power supply is off and locked against accidental switch-on.

Wear personal protective equipment (full face mask, temperature–resistant gloves, and protective clothing).

Ensure safe distance from moveable parts to avoid crushing and shearing injuries.

Ensure no one walks or stands under lifted loads.

Vacuum Sealing Surfaces and Seals Check

Check vacuum sealing surfaces for damage.

Check seals at the excess pressure valves for damage.