Kubota Diesel Engine V2403-CR-E5

Visual Inspection of Air Intake Line

Check for issues in the air intake line

Are the lock bolts tight enough?

Stop the engine before checking and changing the engine oil and the oil filter cartridge.

Ensure the engine and exhaust components are cool before inspection.

Wear gloves to avoid skin contact with engine oil.

Is the engine stopped for more than 5 minutes before checking the oil level?

Remove the oil level gauge, wipe it clean, and reinstall it.

Take the oil level gauge out again and check the oil level.

Is the coolant temperature warning lamp on?

Is steam or coolant squirting from the radiator overflow pipe?

Turn off the load and keep the engine idling for at least 5 minutes.

Has the engine cooled down gradually?

Ensure no gasoline or alcohol is mixed with diesel fuel.

Stop the engine before refueling.

Refuel in a well-ventilated and wide area.

Do not smoke when working around the battery or refueling.

Check the fuel level gauge to ensure it is above the lower limit.

Is the fuel level above the lower limit?

Ensure the following rubber pipings are replaced

Consult your local KUBOTA Dealer for this service