Continental Tumble Dryer NG120S

Inform the fire department about the upcoming test if the auxiliary output is used to notify them.

Disconnect the auxiliary output if it is used to activate a building sprinkler system.

Activate the fire suppression system and check if the auxiliary output contact is triggered.

Verify the auxiliary output functions as expected

Reconnect the auxiliary output if it was disconnected prior to the test.

Inform the fire department that the test is complete if they were notified before the test.

Affix appropriate country/gas category label if required

Gas Supply Pressure Verification

Enter the current gas supply pressure

Is the gas supply pressure within the acceptable range?

Manifold Pressure Verification and Adjustment

Enter the current manifold pressure

Is the manifold pressure within the acceptable range?

Adjust the gas valve governor/regulator as necessary

Disconnect electric power to the tumble dryer before servicing.

Close gas shut-off valve to gas tumble dryer before servicing.

Close steam valve to steam tumble dryer before servicing.

Ensure all guards/panels are in place before starting the tumble dryer.

Reconnect any removed ground wires to ensure proper grounding of the tumble dryer.

Remove all lint from lint compartments and lint screen.

Ensure the dryer is used for drying water washed fabrics only.

Verify that none of the following items are in the dryer

Ensure surrounding areas are free of flammable and combustible products.

Remove debris from the lint screen filter.

Clean inside of the lint filter compartment.

Keep the area around the exhaust opening free from lint, dust, and dirt.

Check hoses for visible signs of deterioration

Is there any visible sign of deterioration on the hoses?

Replacement of Deteriorated Hoses

Replace any hose showing signs of deterioration

Describe any issues found during inspection