Continental Commercial Washer-Extractor HS-6032

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Chemical and Water Residue Precautions

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Emergency Stop Functionality Check

Verify that operating the Emergency Stop disconnects all machines

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Check that the temperature of the parts to be handled represents no risk of burns

Ensure eye protection and avoid direct contact with chemical residues in the dispenser

Use eye protection and avoid direct contact with residual water in the draining pump and valve

Request a register or report of all maintenance and service work done on the washer from the Authorised Technical Service

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Check for water leakage from the bearing drain pipe at the back of the washer

Is there any water leakage indicating poor seal condition?

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water supply valves.

Ensure the temperature of the parts to be handled is safe to touch.

Wear protective gear to avoid direct contact with chemical residues and protect eyes.

Avoid direct contact with residual water from the draining pump and valve.

Clean the dispenser using a cloth or sponge dampened with warm water.

Avoid using abrasive products, solvents, or tools that could damage the dispenser.

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Use a damp cloth or sponge to clean the seal

Remove traces of laundry products or fabric pieces from the seal folds