Continental Commercial Washer-Extractor RMG617

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Ensure the dispenser is free from chemical residues

Ensure the draining pump and valve are free from residual water

Emergency Stop Functionality Check

Does operating the Emergency Stop disconnect all machines?

Does the Emergency Stop releasing mechanism not connect the machines?

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Check that the temperature of the parts to be handled represents no risk of burns.

Ensure no direct contact with chemical residues in the dispenser.

Avoid direct contact with residual water in the draining pump and valve.

Ensure availability of required tools

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Use eye protection during cleaning operations

Use a damp cloth or sponge to clean the seal

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Reassemble and correctly replace all panels after maintenance

Request a maintenance report from the Authorised Technical Service

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues and protect eyes

Avoid direct contact with residual water and use eye protection

Check for water leakage from the bearing drain pipe at the back of the washer

Determine if the seals are in poor condition based on water leakage