Continental Commercial Washer-Extractor EH040

Ensure actions are not reserved for Authorised Technical Services.

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Check that the temperature of the parts to be handled represents no risk of burns.

Avoid direct contact with chemical residues in the dispenser and protect the eyes.

Avoid direct contact with residual water in the draining pump and valve, and use eye protection.

Reassemble all panels and replace them correctly after maintenance work.

Consult Authorised Technical Service for a maintenance report.

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Use a damp cloth or sponge to clean the seal

Remove traces of laundry products or fabric pieces from the seal folds

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Ensure the temperature of the parts to be handled poses no risk of burns.

Ensure the dispenser is free of chemical residues and avoid direct contact with skin and eyes.

Ensure the draining pump and valve are free of residual water and avoid direct contact with skin and eyes.

Request the Authorised Technical Service for a periodic overhaul of the washing machine.

Enter the number of washing cycles since the last overhaul.

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Use eye protection during cleaning operations

Use a damp cloth or sponge to clean the exterior

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of parts to be handled is safe

Avoid direct contact with chemical residues and protect eyes

Avoid direct contact with residual water and use eye protection

Ensure all panels are reassembled correctly after maintenance

Request maintenance and service report from Authorised Technical Service