Continental Commercial Washer-Extractor RMG623

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Use a damp cloth or sponge to clean the seal

Remove traces of laundry products or fabric pieces from the seal folds

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water supply valves.

Ensure the temperature of the parts to be handled is safe to touch.

Avoid direct contact with chemical residues and protect eyes.

Avoid direct contact with residual water from the draining pump and valve, and use eye protection.

Clean the dispenser using a cloth or sponge dampened with warm water.

Avoid using abrasive products, solvents, or tools that could damage the dispenser.

Ensure actions reserved for Authorised Technical Services are not performed by unauthorized personnel.

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Check that the temperature of the parts to be handled represents no risk of burns.

Avoid direct contact with chemical residues in the dispenser and protect the eyes.

Avoid direct contact with residual water in the draining pump and valve, and use eye protection.

Reassemble all panels and replace them correctly after maintenance work.

Consult Authorised Technical Service for a maintenance and service work report.

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Check for water leakage from the bearing drain pipe at the back of the washer

Is there any water leakage indicating poor seal condition?

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Check that the temperature of the parts to be handled represents no risk of burns

Ensure the dispenser is free of chemical residues and avoid direct contact with skin

Ensure the draining pump and valve are free of residual water and avoid direct contact with skin

Reassemble and correctly replace all panels after maintenance work

Consultation with Authorised Technical Service

Request a register or report of all maintenance and service work done on the washer from the Authorised Technical Service