Continental Commercial Washer-Extractor RMG613

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Emergency Stop Functionality Check

Verify that operating the Emergency Stop disconnects all machines in the laundry

Confirm that the Emergency Stop releasing mechanism does not connect the machines

Ensure actions reserved for Authorised Technical Services are not performed

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Check that the temperature of the parts to be handled represents no risk of burns

Avoid direct contact with chemical residues in the dispenser and protect the eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Reassemble all panels and replace them correctly after maintenance work

Consult Authorised Technical Service for a maintenance report

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of parts to be handled is safe

Avoid direct contact with chemical residues and protect eyes

Avoid direct contact with residual water and use eye protection

Ensure all panels are reassembled correctly after maintenance

Request maintenance and service report from Authorised Technical Service

Ensure actions are only performed by Authorised Technical Services.

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Check that the temperature of the parts to be handled represents no risk of burns.

Avoid direct contact with chemical residues in the dispenser and protect eyes.

Avoid direct contact with residual water in the draining pump and valve and use eye protection.

Reassemble all panels and replace them correctly after maintenance.

Request a register or report of all maintenance and service work from the Authorised Technical Service.

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Check for water leakage from the bearing drain pipe at the back of the washer

Determine if the seals are in poor condition based on water leakage