Continental Commercial Washer-Extractor EH060

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Request a register or report of all maintenance and service work from the Authorised Technical Service

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Use eye protection during cleaning operations

Use a damp cloth or sponge to clean the exterior

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Reassemble and correctly replace all panels after maintenance

Request a maintenance report from the Authorised Technical Service

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Check for water leakage from the bearing drain pipe at the back of the washer

Determine if the seals are in poor condition based on water leakage

Ensure actions reserved for Authorised Technical Services are not performed by unauthorized personnel.

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Check that the temperature of the parts to be handled represents no risk of burns.

Avoid direct contact with chemical residues in the dispenser and protect eyes.

Avoid direct contact with residual water in the draining pump and valve and use eye protection.

Reassemble all panels and replace them correctly after maintenance.

Request a register or report of all maintenance and service work from the Authorised Technical Service.