Continental Commercial Washer-Extractor HS-6017

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Reassemble and correctly replace all panels after maintenance

Request a maintenance report from the Authorised Technical Service

Ensure actions reserved for Authorised Technical Services are not performed by unauthorized personnel.

Disconnect and mechanically lock the external switch.

Close and mechanically lock the manual water inlet valves.

Check that the temperature of the parts to be handled represents no risk of burns.

Avoid direct contact with chemical residues in the dispenser and protect the eyes.

Avoid direct contact with residual water in the draining pump and valve, and use eye protection.

Ensure all panels are reassembled and replaced correctly after maintenance.

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser

Avoid direct contact with residual water in the draining pump and valve

Use eye protection during cleaning operations

Clean the outside of the washing machine with a damp cloth or sponge

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Check for water leakage from the bearing drain pipe at the back of the washer

Determine if the seals are in poor condition based on water leakage

Disconnect and mechanically lock the external switch

Close and mechanically lock the manual water inlet valves

Ensure the temperature of the parts to be handled is safe

Chemical and Water Residue Precautions

Avoid direct contact with chemical residues in the dispenser and protect eyes

Avoid direct contact with residual water in the draining pump and valve and use eye protection

Emergency Stop Functionality Check

Verify that operating the Emergency Stop disconnects all machines