BINDER Climate Chamber MKT 720

Ensure the following safety precautions are observed

Turn off the chamber at the main power switch and disconnect the power plug

Is the maintenance work being conducted by licensed electricians or authorized experts?

Is the refrigeration system maintenance conducted by qualified personnel trained according to EN 13313:2010?

Ensure regular maintenance work is performed at least once a year

Verify legal requirements are met regarding qualifications of service personnel, scope of testing, and documentation

Document all work on the refrigeration system in the service log book

Turn off the chamber at the main power switch

Ensure the chamber does not become wet during operation or maintenance

Confirm maintenance is conducted by licensed electricians or authorized experts

Verify refrigeration system maintenance is conducted by qualified personnel trained according to EN 13313:2010

Inspect the condenser fan for dust accumulation

Pre-Decontamination Safety Measures

Ensure proper decontamination is performed if contamination by hazardous substances has occurred.

Disconnect the chamber from the power supply.

Select appropriate disinfectants for use

Is there any doubt regarding the suitability of cleaning products?

Contact BINDER service if unsure about cleaning products.

Turn off the chamber at the main power switch and disconnect the power plug.

Wear protective gloves and goggles.

Ensure no water or cleaning agents are spilled over the inner and outer surfaces.

Select cleaning agents for exterior surfaces, inner chamber, racks, door gaskets

Select cleaning agents for instrument panel

Select cleaning agents for zinc coated hinge parts, rear chamber wall

Wipe the surfaces with a moistened towel.

Turn off the chamber at the main power switch

Ensure the chamber does not become wet during operation or maintenance

Confirm the rear panel of the chamber is not removed

Verify maintenance work is conducted by licensed electricians or authorized experts

Ensure refrigeration system maintenance is conducted by qualified personnel trained according to EN 13313:2010

Open the left maintenance access flap