BINDER Climate Chamber MK720-400V-C

Turn off the chamber at the main power switch

Ensure the chamber does not become wet during operation or maintenance

Confirm maintenance is conducted by licensed electricians or authorized experts

Verify refrigeration system maintenance is conducted by qualified personnel trained according to EN 13313:2010

Inspect the condenser fan for dust accumulation

Check the status display on the rear panel

Turn off the chamber at the main power switch and disconnect the power plug.

Is the chamber dry and free from moisture?

Is the maintenance being conducted by licensed electricians or experts authorized by BINDER?

Is the refrigeration system work being conducted by qualified personnel trained according to EN 13313:2010?

Refrigeration System Maintenance

Conduct a leak test in accordance with Regulation (EU) 517/2014 (Article 4 and Article 10 (1) (b)).

Turn off the chamber at the main power switch

Ensure the chamber is not wet during operation or maintenance

Confirm the rear panel of the chamber is not removed

Is the maintenance work being conducted by a licensed electrician or authorized expert?

Is the refrigeration system maintenance conducted by qualified personnel trained according to EN 13313:2010?

Turn off the chamber at the main power switch and disconnect the power plug.

Wear protective gloves and goggles.

Ensure no water or cleaning agents are spilled over the inner and outer surfaces.

Select cleaning agents for exterior surfaces, inner chamber, racks, door gaskets

Select cleaning agents for instrument panel

Select cleaning agents for zinc coated hinge parts, rear chamber wall

Wipe the surfaces with a moistened towel.