Sullair Air Dryer SRHT 350 AC

Warning: Compressed air! Risk of serious injury or death through contact with quickly or suddenly escaping compressed air or through bursting and/or unsecured plant components. Compressed air is a highly dangerous energy source.

Warning: Supply voltage! Contact with non-insulated parts carrying supply voltage involves the risk of an electric shock resulting in injuries and death.

Caution: Hot surfaces! During operation, several components can reach surface temperatures of more than 140°F (60°C). There is the risk of burns.

Is the power supply switched off and the device marked for maintenance measures?

Has the device been switched off and left to cool for at least 30 minutes?

Upload a photo of the SULLIMAX Service Unit before replacement

Was the SULLIMAX Service Unit replaced?

Upload a photo of the new SULLIMAX Service Unit after replacement

Danger! Compressed air! Risk of serious injury or death through contact with quickly or suddenly escaping compressed air or through bursting and/or unsecured plant components. Compressed air is a highly dangerous energy source. Never work on the dryer when the system is under pressure. Never direct the compressed-air outlet or condensate drain hoses at persons.

The user is responsible for the proper maintenance of the dryer. Non-observance of the instructions in the 'Installation' and 'Maintenance, troubleshooting, spare parts and dismantling' chapters leads to the expiration of the guarantee. Improper maintenance may result in dangerous situations for the personnel and/or the device.

Danger! Supply voltage! Contact with non-insulated parts carrying supply voltage involves the risk of an electric shock resulting in injuries and death. Only qualified and skilled personnel are authorised to run electrically-operated devices.

Prior to undertaking maintenance measures at the device, the following requirements must be met: Make sure that the power supply is switched off and that the device is off and marked for maintenance measures. Please also ensure that the power supply cannot be re-established during the works. Prior to carrying out maintenance works at the dryer, switch it off and wait for at least 30 minutes.

Caution! Hot surfaces! During operation, several components can reach surface temperatures of more than 140°F (60°C). There is the risk of burns. All components concerned are installed inside of the closed housing. The housing must only be opened by certified skilled personnel. Some components can reach high temperatures during operation. Avoid any contact until the system or the component has cooled down.

Check whether the dew point indicated on the electronics is correct.

Ensure that the condensate drain system functions properly.

Make sure that the condenser is clean.

Sign off on the daily air dryer maintenance

Danger! Compressed air! Risk of serious injury or death through contact with quickly or suddenly escaping compressed air or through bursting and/or unsecured plant components. Compressed air is a highly dangerous energy source.

Never work on the dryer when the system is under pressure. Never direct the compressed-air outlet or condensate drain hoses at persons. The user is responsible for the proper maintenance of the dryer.

Danger! Supply voltage! Contact with non-insulated parts carrying supply voltage involves the risk of an electric shock resulting in injuries and death. Only qualified and skilled personnel are authorised to run electrically-operated devices.

Caution! Hot surfaces! During operation, several components can reach surface temperatures of more than 140°F (60°C). There is the risk of burns. All components concerned are installed inside of the closed housing. The housing must only be opened by certified skilled personnel.

Verify for tightness all the screws of the electric system and that all the “Faston” type connections are in their proper position.

Inspect the unit for broken, cracked, or bare wires.

Inspect refrigerating circuit for signs of oil and refrigerant leakage.

Measure and record amperage. Verify that readings are within acceptable parameters as listed in the specification table.

Inspect condensate drain flexible hoses, and replace if necessary.

Danger! Compressed air! Risk of serious injury or death through contact with quickly or suddenly escaping compressed air or through bursting and/or unsecured plant components. Compressed air is a highly dangerous energy source.

Never work on the dryer when the system is under pressure. Never direct the compressed-air outlet or condensate drain hoses at persons.

The user is responsible for the proper maintenance of the dryer. Non-observance of the instructions in the 'Installation' and 'Maintenance, troubleshooting, spare parts and dismantling' chapters leads to the expiration of the guarantee. Improper maintenance may result in dangerous situations for the personnel and/or the device.

Danger! Supply voltage! Contact with non-insulated parts carrying supply voltage involves the risk of an electric shock resulting in injuries and death.

Only qualified and skilled personnel are authorised to run electrically-operated devices. Prior to undertaking maintenance measures at the device, the following requirements must be met: Make sure that the power supply is switched off and that the device is off and marked for maintenance measures. Please also ensure that the power supply cannot be re-established during the works.

Prior to carrying out maintenance works at the dryer, switch it off and wait for at least 30 minutes.

Caution! Hot surfaces! During operation, several components can reach surface temperatures of more than 140°F (60°C). There is the risk of burns.

All components concerned are installed inside of the closed housing. The housing must only be opened by certified skilled personnel.

Some components can reach high temperatures during operation. Avoid any contact until the system or the component has cooled down.