
Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Toyota Vehicle HZJ79
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
2 Weekly Tire Pressure Check
Preparation
Ensure the vehicle has been parked for at least 3 hours and has not been driven for more than 1.5 km or 1 mile.
Gather a tire pressure gauge.
Tire Pressure Check
Check the tire pressure for each tire, including the spare tire.
Enter the tire pressure for the Front Left Tire.
Enter the tire pressure for the Front Right Tire.
Enter the tire pressure for the Rear Left Tire.
Enter the tire pressure for the Rear Right Tire.
Battery Recharge
Pre-recharge Safety Checks
Remove the vent plugs
Is the battery installed on the vehicle?
Disconnect the ground cable if battery is installed on the vehicle
Charger Connection
Is the power switch on the recharger off when connecting the charger cables to the battery?
Is the power switch on the recharger off when disconnecting the charger cables from the battery?
Charging Environment
Is the charging area unconfined and well-ventilated?
Vehicle Interior Cleaning
Vinyl Interior Cleaning
Vacuum the vinyl upholstery to remove loose dirt
Apply mild soap or detergent solution to the vinyl using a sponge or soft cloth
Allow the soap solution to soak in for a few minutes
Remove dirt and wipe off soap with a clean damp cloth
Repeat the procedure if all dirt is not removed
Use commercial foaming-type vinyl cleaner if necessary, following manufacturer's instructions
Carpet Cleaning
Vacuum the carpets thoroughly to remove as much dirt as possible
Engine Oil Check
Preparation
Ensure the vehicle is on a level spot
Turn off the engine and wait a few minutes for the oil to drain back into the engine
Dipstick Inspection
Pull out the dipstick and wipe it clean with a rag
Reinsert the dipstick fully
Pull out the dipstick again and check the oil level
Oil Level Adjustment
Is the oil level below or slightly above the low level?
Battery Fluid Check
Checking by Fluid Level Lines
Check fluid level in all cells
Is the fluid level between the upper and lower lines for all cells?
Is the fluid level lower than the lower line in any cell?
Adding Distilled Water
Remove the vent plugs
Add distilled water to cells needing fluid
Retighten the vent plugs securely
Ensure no cells are overfilled
MaintainX Assist is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













