SureShot Dispensing Systems Multi-Sweetener Dispenser AC2-GP

Press and hold the Panel Disable button until two beeps are heard

Verify lights on the button panel flash in sequence

Wipe the panel with a soft cloth dampened with warm, clean soapy water

Rinse with a soft cloth dampened with warm, clean water

Press and hold the Panel Disable button for several seconds until several beeps are heard

Did the button panel enable automatically after 3 minutes?

Remove the top by lifting it up and off the dispenser.

Remove the transition piece by lifting it up and off the dispenser.

Rinse the top and transition piece thoroughly with warm, clean water.

Ensure water temperature is between 140°F/60°C and 170°F/77°C for washing.

Wash thoroughly to reach all corners and crevices.

Use a dishwasher for cleaning on the full wash cycle, if available.

Rinse well with warm, clean water.

Wipe dispenser interior using a soft cloth dampened with warm, clean, soapy water

Gather a soft cloth and warm, clean soapy water

Ensure stainless steel cleaner is available

Wipe exterior surfaces with a dampened soft cloth

Apply stainless steel cleaner to stainless steel surfaces only

Remove the catch tray and screen by tilting the front of the catch tray up towards the dispenser and then pulling it away.

Rinse thoroughly with warm, clean water.

Wash in hot water with a good quality cleaner at a water temperature between 140°F/60°C and 170°F/77°C.

Wash thoroughly to reach all corners and crevices.

Rinse well with warm, clean water.