SureShot Dispensing Systems Refrigerated Liquid Dispenser AC230-­PC Unishot

Open the door to the refrigerated product compartment

Thoroughly wipe the area around the valve with a warm, soapy cloth or a sanitized handi­wipe

Wipe the area with a damp cloth to remove any soap residue

Close door to refrigerated product compartment

Remove the product case from the refrigerated product compartment of the dispenser

Wash the product case with one of the following

Rinse with hot, clear water to remove soap residue

Dry the product case thoroughly

Was the product case cleaned each time the valve was cleaned, or more frequently if required?

Prepare a container of warm, soapy water

Ensure not to dislodge the cable during cleaning

Turn the power to the dispenser OFF

Drain product tanks and remove empty tanks

Open the door to the refrigerated product compartment

Remove the catch tray (if applicable) by lifting it up and off

Remove the 4 pan-head screws and carefully remove the front splash panel/valve cover

Remove the tank from the dispenser when the product has run out.

Remove and discard the product delivery tube from the tank.

Rinse the tank and cover with lukewarm potable water.

Ensure water temperature is at least 140º F or 60º C.

Add a good quality general cleaner to the hot wash water as recommended by the detergent supplier.

Wash thoroughly using a bottle brush to reach all corners and crevices.

Check for ice build-up in the refrigerated product compartment

Remove and discard any accumulated ice

Wipe the interior with a soft cloth