SureShot Dispensing Systems Refrigerated Liquid Dispenser AC220-­SS FlexoShot

Is there any ice build-up in the dispenser?

Gently remove ice build-up, if any ice forms.

Is the ice build-up removed during a defrost cycle?

Unplug the dispenser and leave the door open for about 15 minutes to allow the ice to soften.

Is a temperature adjustment required?

If temperature adjustment is required, describe the actions taken.

Check for ice build-up in the refrigerated product compartment

Remove and discard any accumulated ice

Wipe the interior with a soft cloth

Prepare a container of warm, soapy water before disassembling the valve

Ensure not to dislodge the cable during cleaning

Turn the power to the dispenser OFF

Drain product tanks and remove empty tanks

Open the door to the refrigerated product compartment

Remove the catch tray (if applicable) by lifting it up and off

Remove the 4 pan-head screws and carefully remove the front splash panel/valve cover

Catch Tray Removal and Initial Rinse

Remove the catch tray by lifting it up and off. Does the dispenser have a catch tray?

Rinse the tray with lukewarm potable water

Ensure the water temperature is at least 140ºF or 60ºC

Add a good quality general cleaner to the hot wash water at the recommended concentration

Wash the tray thoroughly using a bottle brush to reach all corners and crevices

If a dishwasher is available, was the tray washed on the pot cycle?

Open the door to the refrigerated product compartment

Thoroughly wipe the area around the valve with a warm, soapy cloth or a sanitized handi­wipe

Wipe the area with a damp cloth to remove any soap residue

Close door to refrigerated product compartment