SureShot Dispensing Systems Refrigerated Liquid Dispenser AC110­-PC Unishot

Prepare a container of warm, soapy water before disassembling the valve.

Ensure the cable is not dislodged during cleaning.

Turn the power to the dispenser OFF.

Open the dispenser door to the refrigerated product compartment.

Remove the product tanks by following the instructions on page 12.

Remove the catch tray (if applicable) by lifting it up and off.

Remove the 4 pan-head screws securing the front splash panel and remove the panel.

Prepare a container of warm, soapy water

Ensure not to dislodge the cable during cleaning

Turn the power to the dispenser OFF

Drain product tanks and remove empty tanks

Open the door to the refrigerated product compartment

Remove the catch tray (if applicable) by lifting it up and off

Remove the 4 pan-head screws and carefully remove the front splash panel/valve cover

Remove the product case from the refrigerated product compartment of the dispenser

Wash with hot, soapy water or an approved sanitary cleaning product

Rinse with hot, clear water to remove soap residue

Is the case cleaned each time the valve is cleaned or more frequently if required?

Open the door to the refrigerated product compartment

Thoroughly wipe the area around the valve with a warm, soapy cloth or a sanitized handi-wipe

Wipe the area with a damp cloth to remove any soap residue

Close door to refrigerated product compartment

Check for ice build-up in the refrigerated product compartment

Remove and discard any accumulated ice

Wipe the interior with a soft cloth