SureShot Dispensing Systems Refrigerated Liquid Dispenser AC120­-SS FlexoShot

Check for ice build-up in the refrigerated product compartment

Remove and discard any accumulated ice

Wipe the interior with a soft cloth

Is there any ice build-up in the dispenser?

Gently remove ice build-up, if any ice forms.

Is the ice build-up removed during a defrost cycle?

Unplug the dispenser and leave the door open for about 15 minutes to allow the ice to soften.

Is a temperature adjustment required?

If temperature adjustment is required, describe the issue.

Open the door to the refrigerated product compartment

Wipe the area around the valve with a warm, soapy cloth or a sanitized handi­wipe

Wipe the area with a damp cloth to remove any soap residue

Close door to refrigerated product compartment

Catch Tray Removal and Initial Rinse

Remove the catch tray by lifting it up and off

Does the dispenser have a catch tray?

Rinse the tray with lukewarm potable water

Ensure water temperature is at least 140ºF or 60ºC

Add general cleaner to the hot wash water as per supplier's recommendation

Wash thoroughly using a bottle brush to reach all corners and crevices

Prepare a container of warm, soapy water before disassembling the valve.

Ensure not to dislodge the cable during cleaning.

Turn the power to the dispenser OFF.

Open the dispenser door to the refrigerated product compartment.

Remove the product tanks by following the instructions on page 12.

Remove the catch tray (if applicable) by lifting it up and off.

Remove the 4 pan-head screws securing the front splash panel and remove the panel.