

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Still Electric Forklift RX20-16C
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1000 Hourly / 1 Yearly Forklift Maintenance
1. Read out the error numbers and clear the list
2. Reset the maintenance interval
3. Check that the labelling is complete
4. Perform a test drive
- Lif Cylinder Check (p. 357)
"WARNING! Risk of injury! Observe safety regulations for working on the lift mast, see the ""Working at the front of the truck"" chapter
1. Check the hydraulic connections and lift cylinder for leaks (visual inspection)
2. Have leaking screw joints or leaking hydraulic cylinders repaired by the authorised service centre;" - Fork Arms Check (p. 358)
1. Check the fork arms (1) for any visible deformation. Wear must not amount to more than 10% of the original thickness
1000 Hourly / 1 Yearly Electrical System Check
Check all power cable connections
Check that the switches, transmitters and sensors are working correctly
Check the lighting and indicator lights
1000 Hourly / 1 Yearly Battery Maintenance
1. Check the lead-acid battery for damage and check the acid density; observe the manufacturer's maintenance instructions
Variant: Replace the non-return valve on lead-acid batteries with electrolyte circulation
Variant: Observe the manufacturer's maintenance instructions for lithium-ion batteries
2. Check the appliance plug and the truck harness for damage
3. Check the battery male connector and the battery harness for damage
4. Check that the battery door, and the sensor if necessary, is working correctly and check for damage
5. Check the battery lock for damage
6. Grease the battery door hinges
Variant: Check the oil level of the hydraulic battery carrier and check for leaks. Check all moving parts for wear and lubricate them
Drive Seat Check
WARNING! Risk of injury! After an accident, check the driver's seat with attached restraining belt and fastening
Check the controls for correct operation
Check the condition of the seat (e.g. wear on the upholstery) and secure fastening to the hood
WARNING Risk of injury! Have the seat repaired by the service centre if you identify any damage during the checks
Sign off on the drive seat check
Seat Belt Maintenance
- Cleaning the seat belt
1. Clean the seat belt as necessary, but without using chemical cleaning materials (a brush will suffice)
- Replacement after an accident
1. As a rule, the seat belt must be changed after an accident;
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













