Hyundai Lift Truck 15BT-9U

Steering axle linkage lubricated?

Tilt cylinder rod ends lubricated?

Hydraulic tank breather cleaned?

Contactor tips replaced due to remarkable roughness?

Sign off on the lift truck maintenance

Check for the oil level of the driving gear case

External appearance check of the vehicle

Sign off on the lift truck check

1. Fasteners in highly loaded (critical) components can quickly fail if they become loosened. Also, loose fasteners can cause damage or failure of the component. For safety, it is important that the correct torque be maintained on all critical fasteners of components that directly support, handle or control the load and protect the operator

- Check critical items, including

·Drive and steering wheel mounting

·Tilt cylinder mounting & yokes

Obvious damage from last shift operation

All capacity, safety, and warning plates or decals are attached and legible

Battery is installed and secured correctly

Battery stopper is installed properly

Battery connector is in safe condition

No external leakage around drive axle

No hydraulic oil leaks and loose fittings

Driver's overhead guard and all other safety devices are in place, securely fastened and undamaged

No damaged or missing parts, corrosion, cracks, breaks etc

Set the fork in its horizontal position on an even ground

Raise it up to 20~30 cm from the ground and push the chain with both hands

Is the tension too high or too low on one side?

If the tension is too high or too low on one side, adjust it with the chain anchor bolt

Sign off on the lift chain tension inspection