Hyundai Forklift 35DS-7E

Air cleaner element replacement steps

Engine oil and oil filter (Initial 50 hours only) Change/Replace

OSHA-approved eye protection rated for 200kPa(30psi) is required for air cleaning operation.

Dispose of oil in locally approved manner.

Check for mast overhead clearance

Fully raise and lower mast and also fully tilt it forward and backward several times

Dispose of used antifreeze mixture in locally approved manner.

Truck for obvious damage and leaks

Transmission oil add if necessary

Lubrication: Steering axle linkage pin check

Lubrication: Steering axle linkage pin clean

Lubrication: Steering axle linkage pin lubricate

Replace the fuel filler when the engine is cool. Carry out this maintenance in a place away from fire. Removing the fuel filler will produce explosive fumes. Wipe off any spilled fuel or oil immediately from the truck or surrounding area.

1 Using a filter wrench, remove the cartridge.

2 Fit the new cartridge with fuels coat the surface of the packing lightly with engine oil, then install.

When the fuel filter is replaced, the fuel system should be bled to remove air if the fuel supply is exhausted during driving.