Hyundai Forklift 45D-7E

The seat adjustable to fit the contours of the operator's body. It will reduce operator fatigue due to long works hours and enhance work efficiency.

(1) Forward/Backward adjustment(A)

1 Pull lever A to adjust seat forward or back ward.

2 The seat can be moved forward and backward over 156mm in 12 steps.

1 Pull lever B to adjustment seat back rest.

2 The backrest of the seat can be reclined to 31+-2Áforward and 34.6+-2Ábackward.

1 Adjusting handle to the operator's weight.

OSHA-approved eye protection rated for 200kPa(30psi) is required for air cleaning operation. When changing oil, remove strainer and clean it with flushing oil. Blow dry compressed air from inside of strainer to outside and install when completely dry.

Dispose of oil in locally approved manner.

Bleed the air after checking the oil level as below;

Check for mast overhead clearance.

Fully raise and lower mast and also fully tilt it forward and backward several times.

Warning: This maintenance requires trained personnel with PPE!

Hydraulic oil return filter replaced

Oil changed after removing drain plug on tank bottom

Examine truck for obvious damage

Check overhead guard for crack or obvious damage

Check backrest for crack or obvious damage

Check forks for crack or obvious damage

If yes, describe the damage or leak

(1) CLEANING AND REPLACING FILTER

Always stop the engine before servicing.

1 Open the door, loosen the wing bolt and remove the recircular plenum assembly.

2 Clean the recircular plenum using a pressurized air(Below 2kgf/cm2, 28psi).

When using pressurized air, be sure to safety glasses.

3 Inspect the filter after cleaning. If it is damaged or badly contaminated, use a new filter.

(2) PRECAUTIONS FOR USING AIR CONDITIONER

1 When using the air conditioner for a long time, open the window once every one hour.

2 Be careful not to overcool the cab.