Hyundai Lift Truck 18BT-9U

Tighten Torque on critical fasteners

Check Lift chain adjustment and wear

Sign off on the lift truck maintenance

Hydraulic hoses, fittings and clamps tightened

Hydraulic pump spline, steering unit spline lubricated

Hydraulic tank suction strainer replaced

Hydraulic oil (conventional) replaced

Sign off on the lift truck maintenance

NOTE: Inspect and lubricate the lift chains every PM (500 hours).

Check for raised or turned pins

Check for wear and worn pins or holes

If chain is 3% longer than a new chain, it is worn and must be discarded

Set the fork in its horizontal position on an even ground

Raise the fork up to 20~30 cm from the ground

Push the chain with both hands. Is the tension too high or too low on one side?

If the tension is too high or too low on one side, adjust it with the chain anchor bolt

Sign off on the lift chain tension inspection

Tighten Torque on critical fasteners

Lubricate truck. (see component)

Check truck visually and inspect components

Truck drive and functional performance