

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Chevrolet Vehicle 2001 Silverado 1500
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
12 Monthly Engine Oil / Chassis Lubrication
Warning: This procedure requires trained personnel with PPE!
GM Oil Life System indicates oil change?
Enter the mileage since the last oil change
Is the vehicle driven in a dusty area?
If the vehicle is driven in a dusty area, change the oil and filter every 3,000 miles or sooner.
Oil and filter changed?
Remember to reset the Oil Life System when the oil and filter have been changed.
Oil Life System reset?
An Emission Control Service.
1 Yearly Vehicle Maintenance
Key Lock Cylinders Service: Lubricate the key lock cylinders with the lubricant specified in Part D.
Body Lubrication Service: Lubricate all body door hinges, hood latch assembly, secondary latch, pivots, spring anchor, release pawl, tailgate hinge, tailgate linkage, tailgate handle pivot points, latch bolt, fuel door hinge, locks and folding seat hardware.
Starter Switch Check: On automatic transmission vehicles, try to start the engine in each gear. The starter should work only in PARK (P) or NEUTRAL (N).
Starter Switch Check: On manual transmission vehicles, put the shift lever in NEUTRAL (N), push the clutch down halfway and try to start the engine. The starter should work only when the clutch is pushed down all the way to the floor.
Automatic Transmission Shift Lock Control System Check: With the engine off, turn the key to the RUN position, but don’t start the engine. Without applying the regular brake, try to move the shift lever out of PARK (P) with normal effort.
Ignition Transmission Lock Check: While parked, and with the parking brake set, try to turn the ignition key to LOCK in each shift lever position.
Parking Brake and Automatic Transmission PARK (P) Mechanism Check: Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake.
Parking Brake and Automatic Transmission PARK (P) Mechanism Check: To check the parking brake’s holding ability: With the engine running and transmission in NEUTRAL (N), slowly remove foot pressure from the regular brake pedal.
Parking Brake and Automatic Transmission PARK (P) Mechanism Check: To check the PARK (P) mechanism’s holding ability: With the engine running, shift to PARK (P). Then release the parking brake followed by the regular brake.
2 Yearly Battery Replacement
Warning: Static from your body transferred to these surfaces may damage the transmitter.
Is the transmitter working at the normal range?
If the transmitter is not working at the normal range, it's probably time to change the battery.
Did the transmitter work after battery replacement?
Sign off on the battery replacement
6 Monthly Vehicle Maintenance
Restraint System Check
Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Have any torn or frayed safety belts replaced. Also look for any opened or broken air bag coverings, and have them repaired or replaced. (The air bag system does not need regular maintenance.)
Wiper Blade Check
Inspect wiper blades for wear or cracking. Replace blade inserts that appear worn or damaged or that streak or miss areas of the windshield. Also see “Wiper Blades, Cleaning” in the Index.
Spare Tire Check
At least twice a year, after the monthly inflation check of the spare tire determines that the spare is inflated to the correct tire inflation pressure, make sure that the spare tire is stored securely. Push, pull, and then try to rotate or turn the tire. If it moves, use the wheel wrench/ratchet to tighten the cable. See “Storing the Spare Tire and Tools” in the Index.
Engine Air Cleaner Filter Restriction Indicator Check
Your vehicle has an indicator located on the air cleaner in the engine compartment that lets you know when the air cleaner filter is dirty and needs to be changed. Check indicator at least twice a year or when your engine oil is changed, whichever occurs first. See “Air Cleaner” in the Index for more information. Inspect your air cleaner filter restriction indicator more often if the vehicle is used in dusty areas or under off road conditions.
6 Monthly Windshield Wiper Blade Inpection
Warning: Ensure the vehicle is parked safely before starting the inspection
Wiper blades show signs of wear and cracking
Select the type of replacement blade
Enter the length of the replacement blade
Upload a photo of the installed replacement blade
Sign off on the windshield wiper blade inspection
Access the parts list for your equipment in MaintainX.
Armor All™ Protectant
1052918
AUTO-TRAK II Fluid
12378508
Capture Dry Spot Remover
1052930
Chassis Lubricant
12377985
Chrome Cleaner and Polish
1050173
Armor All™ Protectant
1052918
AUTO-TRAK II Fluid
12378508
Capture Dry Spot Remover
1052930
Chassis Lubricant
12377985
Chrome Cleaner and Polish
1050173
Armor All™ Protectant
1052918
AUTO-TRAK II Fluid
12378508
Capture Dry Spot Remover
1052930
Chassis Lubricant
12377985
Chrome Cleaner and Polish
1050173
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













