Chevrolet Vehicle Silverado 5500HD

Lubrication of Suspension and Steering Components

Suspension and steering components lubricated?

Change 4x2 Front Axle Wheel Bearing Oil

4x2 front axle wheel bearing oil changed?

Change 4x4 Front Axle Wheel Bearing Grease

4x4 front axle wheel bearing grease changed?

Change Rear Axle Oil (Vocational Applications)

Warning: Always check the inflation pressure when the tires are cold.

Tire manufacturer’s recommended cold inflation pressure followed?

All tires on the steering axle within 21 kPa (3 psi) of each other?

All drive axle tires within 34 kPa (5 psi) of each other?

Moisture kept from the inside of tires to minimize rim corrosion?

Sign off on the daily tire inflation check

Warning: To prevent property damage, personal injury, and/or death, always maintain your tires in good condition. Frequently check and maintain correct inflation pressures as specified by tire manufacturers. Inspect periodically for abnormal wear patterns and repair/replace cut or broken tire casing. Always use experienced, trained personnel with proper equipment and correct procedures to mount or remove tires and wheels.

Tires checked for abnormal wear patterns and proper inflation pressures

Tire casings checked for cuts or breaks

Tires checked for cuts or other damage to the tread or sidewalls

Tires checked for missing, broken, or damaged valve cap and stem

Warning: To prevent personal injury or death, avoid breathing brake lining fiber dust. Always use a respirator while performing brake maintenance.

Warning: To prevent property damage, personal injury, and/or death, always check and maintain brakes in proper condition and adjustment. Out-of-adjustment brakes could cause reduced braking ability.

Warning: All new GM vehicles use non-asbestos brake linings. However, exposure to excessive amounts of brake material dust may be a potentially serious health hazard. To help protect yourself and others, follow all of the precautions in this Section when servicing the brakes.

Wearing a respirator approved by National Institute for Occupational Safety and Health (NIOSH) or Mine Safety Appliances (MSA) during all brake service procedures?

Never used compressed air or dry brushing to clean brake parts or assemblies?

Cleaned brake parts and assemblies in the open air?

Never used compressed air or dry sweeping to clean the work area?

Disposed of used rags with care to prevent getting dust into the air?

Used an approved respirator when emptying vacuum cleaners and handling used rags?

Warning: This procedure requires trained personnel!

Enter the current mileage of the vehicle

Is the CHANGE ENGINE OIL SOON message displayed?

If the CHANGE ENGINE OIL SOON message is displayed, change the oil as soon as possible within the next 1 000 km (600 mi)

Enter the REMAINING OIL LIFE percentage

If the REMAINING OIL LIFE percentage is near 0%, an oil change is needed

Remember to reset the oil life system whenever the oil is changed

Sign off on the engine oil change