Hyundai Forklift 50DA-7E

Hydraulic oil return filter Replace

Park the truck in a level place and lower the forks.

Then stop the engine and apply the parking brake.

Change oil after removing drain plug on tank bottom

Transmission oil & filter Change

Truck for obvious damage and leaks

Warning: This inspection requires trained personnel with PPE!

Is the forklift in operational condition?

If forklift is not operational, report the issues to the maintenance team and stop the procedure

Visual check: Any obvious damage?

Visual check: All capacity, safety, and warning plates or decals are attached and legible?

Visual check: Any leaking fuel, engine coolant, transmission fluid, etc. before and after starting engine?

Visual check: Any hydraulic oil leaks and loose fittings?

Visual check: Driver's overhead guard, load back rest and all other safety devices are in place, securely fastened and undamaged?

Visual check: Any issues with the critical components that handle or carry the load?

(1) These are the parts which the operator cannot judge the remained lifetime of them by visual inspection.

(2) Repair or replace if an abnormality of these parts is found even before the recommend replacement interval.

Replacement of consumable service parts is not covered under warranty.

Every 1 years: Master cylinder and wheel cylinder caps dust seals

OSHA-approved eye protection rated for 200kPa(30psi) is required for air cleaning operation.

Dispose of oil in locally approved manner.

Check for mast overhead clearance.

Fully raise and lower mast and also fully tilt it forward and backward several times.

Dispose of used antifreeze mixture in locally approved manner.