Daikin Air Conditioner Outdoor Unit RKC12PV2S

Wait for 10 minutes after turning off all power supplies before starting disassembly

Does the model have a ferrite core on the earth/ground harness?

Unfasten the hooks and remove the PCB

Ensure the 2 projections are fitted to the PCB during reassembly

Ensure all power supplies are turned off

Wait for 10 minutes after turning off power supplies before starting disassembly

Remove the 7 screws on the terminal board and disconnect the connecting wire and power supply wire

Remove the 3 screws, and then the wire fixture

Disconnect the connector [S80] (four way valve coil)

Disconnect the connector [S20] (electronic expansion valve coil)

Disconnect the 2 connectors from the reactor

Waited for 10 minutes after turning off all power supplies?

Untie the 2 strings and pull out the sound blanket (outer)

Pull out the sound blanket (inner)

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Pull out the discharge pipe temperature thermistor

Ensure the fixture for the thermistor is not lost

Check for sound blanket (back) and remove if present

Pull out the outdoor heat exchanger thermistor and remove the thermistor ASSY

Ensure the clip for the thermistor is not lost

Waited for 10 minutes after turning off all power supplies?

Remove the screw of the stop valve cover

Pull down and remove the stop valve cover

Ensure the 3 hooks are fitted when reassembling

Remove the 3 screws, and then the top panel

Remove the 6 screws of the front panel

Lift up the right side of the front panel and unfasten the 2 hooks