Daikin Air Conditioner Outdoor Unit RKC25QVM

Waited for 10 minutes after turning off all power supplies?

Untie the 2 strings and pull out the sound blanket (outer)

Pull out the sound blanket (inner)

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the nut (M6 size) and then the outdoor fan

Align the mark of the outdoor fan with the D-cut section of the motor shaft when reassembling

Disconnect the connector depending on the model

Note the location differences of connectors [S70] and [S71]

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Remove the 2 screws of the reactor

Slide the reactor upward to unfasten the 2 hooks

Remove the 2 screws, and then the partition plate

Fit the hole on the partition plate to the hook on the bottom frame

Wait for 10 minutes after turning off all power supplies before disassembling work

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns

Ventilate the room if refrigerant gas leaks during work

Prepare wet cloth to extinguish fire immediately in case refrigerant oil catches fire

Do not discharge refrigerant gas into the atmosphere; collect all refrigerant gas

Apply nitrogen replacement when heating up the brazed part

Avoid using a metal saw for cutting pipes to prevent sawdust contamination

Use protective sheet or steel plate to shield peripheries from brazing flame

Waited for 10 minutes after turning off all power supplies?

Unfasten the 2 hooks and remove the PCB

Ensure the 2 projections are fitted to the PCB during reassembly