Daikin Air Conditioner Outdoor Unit RKC12QV2S

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Remove the 2 screws of the reactor

Slide the reactor upward to unfasten the 2 hooks

Remove the 2 screws, and then the partition plate

Fit the hole on the partition plate to the hook on the bottom frame

Waited for 10 minutes after turning off all power supplies?

Remove the screw of the stop valve cover

Pull down and remove the stop valve cover

Ensure the 3 hooks are fitted when reassembling

Remove the 3 screws, and then the top panel

Remove the 6 screws of the front panel

Lift up the right side of the front panel and unfasten the 2 hooks

Wait for 10 minutes after turning off all power supplies before starting disassembly

Check for ferrite core on the earth/ground harness

Unfasten the hooks and remove the PCB

Fit the projections to the PCB during reassembly

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the 7 screws on the terminal board and disconnect the connecting wire and power supply wire

Remove the 3 screws, and then the wire fixture

Disconnect the 2 connectors from the reactor

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Pull out the discharge pipe temperature thermistor

Ensure the fixture for the thermistor is not lost

Check for sound blanket (back) and remove if present

Pull out the outdoor heat exchanger thermistor and remove the thermistor ASSY

Ensure the clip for the thermistor is not lost