Daikin Air Conditioner Outdoor Unit RKC25PVM

Wait for 10 minutes after turning off all power supplies before starting disassembly

Pull out the discharge pipe temperature thermistor

Pull out the outdoor heat exchanger thermistor and remove the thermistor ASSY

Ensure all power supplies are turned off

Wait for 10 minutes after turning off power supplies

Check for ferrite core on the earth/ground harness

Unfasten the hooks and remove the PCB

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Remove the 2 screws of the reactor

Slide the reactor upward to unfasten the 2 hooks

Remove the 2 screws, and then the partition plate

Fit the hole on the partition plate to the hook on the bottom frame

Ensure all power supplies are turned off

Wait for 10 minutes after turning off power supplies before starting disassembly

Remove the 7 screws on the terminal board and disconnect the connecting wire and power supply wire

Remove the 3 screws, and then the wire fixture

Disconnect the connector [S80] (four way valve coil)

Disconnect the connector [S20] (electronic expansion valve coil)

Disconnect the 2 connectors from the reactor

Wait for 10 minutes after turning off all power supplies before starting disassembly.

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns.

Is the room ventilated in case of refrigerant gas leakage?

Ensure no flames are exposed to refrigerant gas to prevent toxic gas generation.

Do not discharge refrigerant gas into the atmosphere.

Collect all refrigerant gas properly.