Daikin Air Conditioner Outdoor Unit RKC20PVM

Wait for 10 minutes after turning off all power supplies before starting disassembly

Pull out the discharge pipe temperature thermistor

Pull out the outdoor heat exchanger thermistor and remove the thermistor ASSY

Have all power supplies been turned off for at least 10 minutes?

Remove the 7 screws on the terminal board and disconnect the connecting wire and power supply wire

Remove the 3 screws, and then the wire fixture

Disconnect the connector [S80] (four way valve coil)

Disconnect the connector [S20] (electronic expansion valve coil)

Disconnect the 2 connectors from the reactor

Waited for 10 minutes after turning off all power supplies?

Remove the nut and then the outdoor fan

Cut the clamp and release the fan motor lead wire from the groove

Remove the screw and then the fan motor fixing frame

Unfasten the 2 hooks on the fan motor fixing frame and release the fan motor lead wire

Remove the 3 screws and then the fan motor

Waited for 10 minutes after turning off all power supplies?

Untie the 2 strings and pull out the sound blanket (outer)

Pull out the sound blanket (inner)

Waited for 10 minutes after turning off all power supplies?

Ensured no risk of burns from heated pipes and parts?

Ventilated the room in case of refrigerant gas leak?

Checked for toxic gas generation risk from refrigerant gas exposure to flames?

Collected all refrigerant gas to prevent atmospheric discharge?

Restored piping by non-oxidation brazing?