Daikin Air Conditioner Outdoor Unit RKC09QV2S

Ensure all power supplies are turned off

Wait for 10 minutes after turning off power supplies

Remove the screws of the reactor

Slide the reactor upward to unfasten the hooks

Remove the screws of the partition plate

Waited for 10 minutes after turning off all power supplies?

Check for ferrite core on the earth/ground harness

Unfasten the hooks and remove the PCB

Ensure the 2 projections are fitted to the PCB during reassembly

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the nut and then the outdoor fan

Cut the clamp and release the fan motor lead wire from the groove

Remove the screw and then the fan motor fixing frame

Unfasten the 2 hooks on the fan motor fixing frame and release the fan motor lead wire

Remove the 3 screws and then the fan motor

Warning: Wait for 10 minutes after turning off all power supplies before disassembling

Pull out the discharge pipe temperature thermistor

Ensure the fixture for the thermistor is not lost

Check for sound blanket (back) and remove if present

Pull out the outdoor heat exchanger thermistor and remove the thermistor ASSY

Ensure the clip for the thermistor is not lost

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the 7 screws on the terminal board and disconnect the connecting wire and power supply wire

Remove the 3 screws, and then the wire fixture

Disconnect the 2 connectors from the reactor