Daikin Air Conditioner Outdoor Unit RKC15PVM

Wait for 10 minutes after turning off all power supplies before starting disassembly

Check for the presence of a ferrite core on the earth/ground harness

Unfasten the hooks and remove the PCB

Fit the projections to the PCB during reassembly

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the nut and then the outdoor fan

Disconnect the connector depending on the model

Cut the clamp and release the fan motor lead wire from the groove

Remove the screw and then the fan motor fixing frame

Unfasten the 2 hooks on the fan motor fixing frame and release the fan motor lead wire

Remove the 3 screws and then the fan motor

Wait for 10 minutes after turning off all power supplies before disassembling work

Ensure pipes and parts heated by the gas brazing machine are cool to avoid burns

Is the room ventilated in case of refrigerant gas leakage?

Prepare wet cloth to extinguish fire immediately in case refrigerant oil catches fire

Do not discharge refrigerant gas into the atmosphere

Restore piping by non-oxidation brazing

Waited for 10 minutes after turning off all power supplies?

Untie the 2 strings and pull out the sound blanket (outer)

Pull out the sound blanket (inner)

Wait for 10 minutes after turning off all power supplies before starting disassembly

Remove the 7 screws on the terminal board and disconnect the connecting wire and power supply wire

Remove the 3 screws, and then the wire fixture

Disconnect the 2 connectors from the reactor