Toyota Forklift PRE200E

All hydraulic connections plugged

Mast placed horizontally on pallets or similar items

Remove the following from the mast

Mast’s component runners and rollers as well as the fork carriage rollers cleaned

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless intended for disposal

Sanding or a paint stripper used to remove paint around welding/grinding area

Keep the area where servicing activities are performed clean. Oil or water will make the floor slippery.

Use the correct working position. Service activities often involve kneeling or bending forward. Try sitting on a toolbox, for example, to relieve the strain on your knees and back.

Loose articles and jewellery may become trapped in the moving parts of the truck. So never wear loose articles or jewellery while working on the truck.

Use the correct tools for the work you are carrying out.

Keep all tools well maintained.

Store and transport old oil according to applicable local regulations.

Do not flush solvents, etc. down the drain unless they are intended to be disposed of in this way. Follow the local disposal regulations.

Heated paint gives off harmful gases. So use sanding or a paint strip- per to remove the paint at least 100 mm around an area where any welding/grinding is to take place.

To ensure that you work safely and to prevent accidents while working on a truck, remember the following:

Check if the area where servicing activities are performed is clean. Oil or water will make the floor slippery.

Check if you are using the correct working position. Service activities often involve kneeling or bending forward.

Check if you are not wearing any loose articles or jewellery while working on the truck.

Check if you are using the correct tools for the work you are carrying out.

Check if all tools are well maintained.

Check if you are storing and transporting old oil according to applicable local regulations.

Check if you are not flushing solvents, etc. down the drain unless they are intended to be disposed of in this way.

Area where servicing activities are performed clean

No loose articles or jewellery worn while working on the truck

Correct tools used for the work

Old oil stored and transported according to applicable local regulations

No solvents flushed down the drain unless intended for disposal

Sanding or a paint stripper used to remove paint around welding/grinding area