KSB SE & Co. KGaA Standardised Chemical Pump MCPK080-50-125

Verify that the system is depressurized

Record the differential pressure across the filter

Is the differential pressure within the acceptable range?

⛔ DANGER — Excessive Temperatures Caused By Friction, Impact Or Frictional Sparks. Explosion hazard! Fire hazard! Damage to the pump set!

Inspection of Coupling and Guards

Check the following components for deformation and sufficient distance from rotating parts

Are all components free from deformation and at a safe distance from rotating parts?

Inspection of Flexible Elements

Inspect the flexible elements of the coupling for signs of wear

Is the alignment of the coupling correct?

Replace any worn parts of the coupling if necessary

Are the operating conditions normal?

Inspect the bearings for any visible damage or wear.

Verify grease quality according to DIN 51825

Select the bearing type for grease quantity check

Enter the grease quantity for pump-end bearing (in grams)

Enter the grease quantity for drive-end bearing (in grams)

CAUTION — Mixing Greases Of Differing Soap Bases

Adjust the re-lubrication intervals to the grease used

Pump dismantled for changing the grease

Fill the bearing cavities with grease

Fill the cavities in the bearing cover

Ensure the following safety measures are observed

Maintenance Schedule Preparation

Prepare a maintenance schedule with emphasis on lubricants, shaft seal, and coupling

Was the pump set serviced regularly?

Were lubricants checked and replenished?