Gardner Denver Compressor L290RS

Follow the locally applicable operating instructions and hazardous material safety data sheets when handling consumables and auxiliary materials.

Avoid direct contact with consumables and auxiliary materials. Wear personal protective equipment.

In case of injuries associated with consumables and auxiliary materials, consult a physician and indicate the material involved.

Keep the safety data sheet for the causative material available.

Clean up escaped consumable materials immediately.

Avoid direct contact with consumables. Wear personal protective equipment.

Open the mesh cover on the intake filter

Check that all parts are in place

Was the area cleaned after the procedure?

Describe any issues encountered during the procedure

Ensure the screw compressor is out of operation, depressurized, and secured from being switched on again

Confirm that the air filter is not removed while the compressor is operating

Check the visual intake filter monitor for red service field indication

Inspect the air filter for dust accumulation

Switch off the main disconnect switch

Open the enclosure to create access

Inspect and clean Scavenge Line

Replace Scavenge Line check valve if necessary

Service Inlet Valve if necessary

Visually check for leakage at Shaft Seal

Re-grease Motor Bearings if necessary