Gardner Denver Compressor L250RS

DANGER: Air/oil under pressure will cause severe personal injury or death.

Shut down the compressor and relieve the system of all pressure.

Disconnect, lockout, and tagout the power supply to the compressor package.

Ensure no oil is spilled to avoid fire and slip hazards.

Check maintenance schedule for changing intervals.

Is the fine oil separator monitored and showing high differential pressure?

Removal of Old Fine Oil Separator

Follow the locally applicable operating instructions and hazardous material safety data sheets when handling consumables and auxiliary materials.

Avoid direct contact with consumables and auxiliary materials. Wear personal protective equipment.

In case of injuries associated with consumables and auxiliary materials, consult a physician and indicate the material involved.

Keep the safety data sheet for the causative material available.

Clean up escaped consumable materials immediately.

Avoid direct contact with consumables. Wear personal protective equipment.

Disconnect the compressed air connection.

Inspect filter pad for dust accumulation

Check for defects in the filter pad

Replace filter pad if any defects are found

Record the condition of the filter pad

Ensure the screw compressor is out of operation, depressurized, and secured from being switched on again

Confirm that the air filter is not removed while the compressor is operating

Check the visual intake filter monitor for red service field indication

Inspect the air filter for dust accumulation

Switch off the main disconnect switch

Open the enclosure to create access

Inspect filter elements for dust accumulation

Replace filter elements if dust accumulation is high

Record the replacement interval adjustment

Review and Adjust Maintenance Plan

Review the maintenance plan for necessary adjustments

Adjust replacement intervals based on dust accumulation rate