JCB JCB Backhoe Loader 3CX 3CX

Sign off on the loader hydraulics maintenance

WARNING! When a seat belt is fitted to your machine replace it with a new one if it is damaged, if the fabric is worn, or if the machine has been in an accident. Fit a new seat belt every three years

Inspect the seat belt for signs of fraying and stretching

Check that the stitching is not loose or damaged

Check that the buckle assembly is undamaged and works correctly

Check that the belt mounting bolts are undamaged, correctly fitted and tightened

Sign off on the seat belt maintenance

- Change Engine Oil and Filter (AK and AR Build)

- Change Engine Oil and Filter (RE and RG Build)

- Change Engine Air Cleaner Outer Element

- Change Air Cleaner Inner Element

- Change Engine Fuel Filter (AK and AR Build)

- Change Engine Fuel Filter (RE and RG Build)

- Clean Lift Pump Strainer (AK and AR Build Only)

- Drain and Clean Engine Fuel Sedimenter

Change Axle Oil (incl. Hubs when applicable)

Change Axle Oil - Limited Slip Differential

Check Steer Axle Movement/Shimming

Warning: If, for whatever reason, a wheel stud is renewed, all the studs for that wheel must be changed as a set, since the remaining studs may have been damaged

On new machines, and whenever a wheel has been removed, check the wheel nut torques every two hours until they stay correct

Every day, before starting work, check that the wheel nuts are tight

The correct torques are shown in the table below:

Sign off on the wheel nut check