

The JCB Backhoe Loader 3CX 2 is a versatile and powerful machine designed for construction and excavation tasks. Known for its durability and efficiency, this backhoe loader excels in various applications, making it an essential asset for any heavy equipment fleet. Experience reliable performance and ease of maintenance with JCB's industry-leading technology.
Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

JCB JCB Backhoe Loader 3CX 2 3CX 2
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1000 Hours / 1 Yeary Loader Engine Maintenance
- Change Engine Oil and Filter (AK and AR Build)
- Change Engine Oil and Filter (RE and RG Build)
- Change Engine Air Cleaner Outer Element
- Change Engine Fuel Filter (AK and AR Build)
- Change Engine Fuel Filter (RE and RG Build)
- Clean Lift Pump Strainer (AK and AR Build Only)
- Check Coolant Quality/Level
- Drain and Clean Engine Fuel Sedimenter
- Check Fan Belt Tension/Condition
Loader Cleaning
Park the machine on firm level ground, engage the parking brake and set the transmission to neutral. Lower the attachments to the ground and stop the engine
Machine parked and prepared for cleaning?
Clean the machine using water and/or steam. Do not allow mud, debris etc to build upon the machine, pay particular attention to the following areas:
Areas cleaned
Stabiliser cavities cleaned and free from debris?
Engine and transmission free from mud build up?
Radiator grille not clogged up?
WARNING! Airborne particles of light combustible material such as straw, grass, wood shavings, etc. must not be allowed to accumulate within the engine compartment or in the propshaft guards (when fitted). Please inspect these areas frequently and clean at the beginning of each work shift or more often if required. Before opening the engine cover, ensure that the top is clear of debris
Engine compartment and propshaft guards free from light combustible material?
1000 Hours / 1 Yeary Loader Transmission Maintenance
Change Transmission Oil
Change Transmission Filter
Change Axle Oil (incl. Hubs when applicable)
Change Axle Oil - Limited Slip Differential
Check Tyre Pressures/Condition
Check Front Hub Bearings
Clean Transmission Strainer
Security/Grease Drive Shafts
Check Steer Axle Movement/Shimming
2000 Hours / 2 Yeary Loader Engine Maintenance
- Change Engine Oil and Filter (AK and AR Build)
- Change Engine Oil and Filter (RE and RG Build)
- Change Engine Air Cleaner Outer Element
- Change Air Cleaner Inner Element
- Change Engine Fuel Filter (AK and AR Build)
- Change Engine Fuel Filter (RE and RG Build)
- Clean Lift Pump Strainer (AK and AR Build Only)
- Check Coolant Quality/Level
- Drain and Clean Engine Fuel Sedimenter
Loader Check
Inspect steelwork for damage
Note damaged paintwork for future repair
All pivot pins are correctly in place and secured by their locking devices
Steps and handrails are undamaged and secure
No broken or cracked window glass
Upload a photo of replaced items
All bucket teeth are undamaged and secure
All lamp lenses are undamaged
Tyres are undamaged and free from penetration by sharp objects
Access the parts list for your equipment in MaintainX.
Bonded Washer, 1/2 in. BSP
1406/0018
Flow Test Adapter
460/15708
Banjo Bolt
460/15707
Threadseal, 50ml, A Medium Strength Thread Sealing Compound
4102/1951
Bonded Washer, 1/4 in. BSP
1406/0011
Bonded Washer, 1/2 in. BSP
1406/0018
Flow Test Adapter
460/15708
Banjo Bolt
460/15707
Threadseal, 50ml, A Medium Strength Thread Sealing Compound
4102/1951
Bonded Washer, 1/4 in. BSP
1406/0011
Bonded Washer, 1/2 in. BSP
1406/0018
Flow Test Adapter
460/15708
Banjo Bolt
460/15707
Threadseal, 50ml, A Medium Strength Thread Sealing Compound
4102/1951
Bonded Washer, 1/4 in. BSP
1406/0011
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













