

The JCB Backhoe Loader 3CX-17 is a versatile and powerful piece of industrial equipment designed for construction and excavation tasks. Known for its durability and efficiency, this backhoe loader combines advanced technology with robust performance, making it an essential asset for any job site.
Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

JCB JCB Backhoe Loader 3CX-17 3CX-17
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1000 Hours / 1 Yeary Loader Transmission Maintenance
- Change Transmission Oil
- Change Transmission Filter
- Change Axle Oil (incl. Hubs when applicable)
- Change Axle Oil - Limited Slip Differential
- Check Tyre Pressures/Condition
- Check Front Hub Bearings
- Clean Transmission Strainer
- Security/Grease Drive Shafts
- Check Steer Axle Movement/Shimming
2000 Hours / 2 Yeary Loader Engine Maintenance
- Change Engine Oil and Filter (AK and AR Build)
- Change Engine Oil and Filter (RE and RG Build)
- Change Engine Air Cleaner Outer Element
- Change Air Cleaner Inner Element
- Change Engine Fuel Filter (AK and AR Build)
- Change Engine Fuel Filter (RE and RG Build)
- Clean Lift Pump Strainer (AK and AR Build Only)
- Check Coolant Quality/Level
- Drain and Clean Engine Fuel Sedimenter
1 Daily Wheel Nut Check
On new machines, and whenever a wheel has been removed, check the wheel nut torques every two hours until they stay correct
Every day, before starting work, check that the wheel nuts are tight
The correct torques are shown in the table below: Front - Nm 680 / Ibf ft 500, Rear - Nm 680 / Ibf ft 500
WARNING! If, for whatever reason, a wheel stud is renewed, all the studs for that wheel must be changed as a set, since the remaining studs may have been damaged
Check the Wheel Nut Torque
Sign off on the wheel nut check
500 Hours / 6 Monthy Loader Transmission Maintenance
Check Transmission Oil Level
Change Transmission Filter
Check Axle Oil Level (incl. Hubs when applicable)
Change Axle Oil - Limited Slip Differential
Check Tyre Pressures/Condition
Check Front Hub Bearings
Security/Grease Drive Shafts
Check Steer Axle Movement/Shimming
Grease Steer Axle Pivots and Linkages
500 Hours / 6 Monthy Loader Engine Maintenance
- Change Engine Oil and Filter (AK and AR Build)
- Change Engine Oil and Filter (RE and RG Build)
- Change Engine Fuel Filter (AK and AR Build)
- Change Engine Fuel Filter (RE and RG Build)
- Clean Lift Pump Strainer (AK and AR Build Only)
- Check Coolant Quality/Level
- Drain and Clean Engine Fuel Sedimenter
- Check Fan Belt Tension/Condition
- Check Engine Mounting Bolts for Tightness
Access the parts list for your equipment in MaintainX.
Bonded Washer, 5/8 in. BSP
1406/0014
Banjo Bolt
460/15707
Bonded Washer, 1/4 in. BSP
1406/0011
Flow Test Adapter
460/15708
Threadseal, 50ml, A Medium Strength Thread Sealing Compound
4102/1951
Bonded Washer, 5/8 in. BSP
1406/0014
Banjo Bolt
460/15707
Bonded Washer, 1/4 in. BSP
1406/0011
Flow Test Adapter
460/15708
Threadseal, 50ml, A Medium Strength Thread Sealing Compound
4102/1951
Bonded Washer, 5/8 in. BSP
1406/0014
Banjo Bolt
460/15707
Bonded Washer, 1/4 in. BSP
1406/0011
Flow Test Adapter
460/15708
Threadseal, 50ml, A Medium Strength Thread Sealing Compound
4102/1951
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













