JCB JCB Backhoe Loader 214 RT 214 RT

Sign off on the daily loader maintenance

- Check the Seat Belt Condition and Security

When a seat belt is fitted to your machine replace it with a new one if it is damaged, if the fabric is worn, or if the machine has been in an accident. Fit a new seat belt every three years

1. Inspect the seat belt for signs of fraying and stretching

2. Check that the stitching is not loose or damaged. Check that the buckle assembly is undamaged and works correctly

3. Check that the belt mounting bolts are undamaged, correctly fitted and tightened;

Park the machine on firm level ground, engage the parking brake and set the transmission to neutral. Lower the attachments to the ground and stop the engine

Clean the machine using water and/or steam. Do not allow mud, debris etc to build upon the machine, pay particular attention to the following areas:

1. Backhoe hoses passing through mainframe

3. Twin ram slew recess in chassis (centremount)

4. Kingpost slide rails (sideshift)

5. Kingpost hose tray and bottom 'shelf' (sideshift)

6. Recess between slew ram and kingpost casting (sideshift)

- Change Engine Oil and Filter (AK and AR Build)

- Change Engine Oil and Filter (RE and RG Build)

- Change Engine Fuel Filter (AK and AR Build)

- Change Engine Fuel Filter (RE and RG Build)

- Clean Lift Pump Strainer (AK and AR Build Only)

- Drain and Clean Engine Fuel Sedimenter

- Check Fan Belt Tension/Condition

- Check Engine Mounting Bolts for Tightness

- Check Axle Oil Level (incl. Hubs when applicable)

- Check Tyre Pressures/Condition

- Check Steer Axle Movement/Shimming

- Grease Steer Axle Pivots and Linkages

- Grease Front Axle Main Pivot;