C.S.F. Inox Centrifugal Pump CS 65-175

Ensure the pump is turned off and disconnected from power source

Wear suitable personal protective equipment

Is the pump used for liquids that harden or crystallize?

Wash the pump before taking it out of operation if used with hardening or crystallizing liquids

Use washing cycles normally used for the plant

Ensure washing liquids are compatible with process liquid and pump

Verify pump model and motor size

Are the bearings shielded and do not require lubrication?

Bearing disassembly and cleaning

Is the grease applied correctly?

Verify the pump is intended for food product handling and requires cleaning.

Select the appropriate cleaning method (CIP or manual disassembly).

Choose necessary detergents, operating temperatures, and concentrations based on the food product.

Check compatibility of chemical products and operating temperatures with pump components.

Prerinse with cold water (15-25°C) for 10-15 minutes.

Warm prerinse with water at 45-60°C for 10 minutes.

Rinse with alkaline solution at 70-80°C for 20-30 minutes.

Ensure washing liquids are compatible with the process liquid and the pump

Wear suitable personal protective equipment

Is the pump used for liquids that harden or crystallize?

Run the pump with washing fluids compatible with the pumped fluid and the pump itself

Ensure the pump is washed before taking it out of operation

Is the pump ready for disassembly?

Clean the dismantled nut before assembling (internal threads)

Select the cleaning method used for the nut

Select the sterilization method used for the cap nut

Ensure chlorine solutions were not used to avoid corrosion of stainless steel