C.S.F. Inox Centrifugal Pump CS 80-175

Did the pump generate the required discharge head rapidly?

Repeat the priming operations if the required discharge head was not achieved.

Discharge Head and Capacity Check

Is the delivery gate valve opened more than necessary?

Throttle the discharge if the pump operates with a lower discharge head than required.

Is the discharge head generated by the pump greater than required?

Consider reducing the diameter of the impeller if the discharge head is too high.

Is the discharge head lower than required with equal flow rate?

Clean the dismantled nut before assembling (internal threads)

Select the cleaning method for the nut

Select the sterilization method for the cap nut

Ensure chlorine solutions are not used to avoid corrosion of stainless steel

Verify the pump is intended for food product handling.

Select the appropriate cleaning method (CIP or manual disassembly).

Determine the cleaning situations applicable

Chemical and Temperature Selection

Specify the detergents to be used for CIP.

Enter the operating temperature for the cleaning process.

Enter the detergent product concentration.

Are the chemical products and operating temperatures compatible with the pump components?

Verify pump model and motor size

Is the pump operating under harsh conditions?

Bearing Disassembly and Cleaning

Select bearing type for lubrication

Enter the quantity of grease used (grams)

Verify pump model and motor size

Are the bearings shielded and do not require lubrication?

Bearing disassembly and cleaning

Top-up grease via grease nipple if necessary