True Food Service Equipment Refrigeration Equipment TAC-30

WARNING: Disconnect power to cabinet before replacing light bulbs.

Ensure the prongs at the end of the bulb are seated appropriately into the lampholder

Verify the light bulb is securely installed

Ensure no steel wool, abrasive or chlorine-based products are used.

Understanding Stainless Steel Opponents

Identify potential threats to stainless steel surfaces

Preventing Rust on Stainless Steel

Use non-abrasive cleaning tools like soft cloths and plastic scouring pads.

Clean along the polish lines or grain of the stainless steel.

Use alkaline, alkaline chlorinated, or non-chloride containing cleaners.

Ensure proper water treatment to reduce deposits.

Disconnect the electrical power to the unit

Choose cleaning method for the condenser coil

Was eye protection used during cleaning with compressed air?

Reconnect the electrical power to the unit

Additional notes or observations

Ensure basic safety precautions are followed when using electrical appliances.

Remove front lower grill assembly by removing two screws in lower corners.

Loosen screws holding the top pivot pins and swing grill up.

Remove frame hooks from pivot pins at top of louver.