Lochinvar Boiler KBX0500L

Follow the service and maintenance procedures in the manual and component literature.

Ensure the boiler is inspected annually by a qualified service technician.

Turn off power to the boiler before any service operation.

Inspect all boiler wiring for good condition and secure attachment.

Ensure power to the boiler is turned off before starting maintenance

Verify that the boiler is inspected annually by a qualified service technician

Test low water cutoff (if used)

Check and reset the button on the low water cutoff

Review service and maintenance procedures in the manual and component literature

Acknowledge the risk of severe personal injury, death, or substantial property damage if procedures are not followed

Turn off power to the boiler before starting inspection

Ensure all safety warnings are understood and followed

Inspect the condensate trap for proper installation and connection to the condensate pipe

Check the condensate line for obstructions to ensure free flow of condensate

Inspect the neutralizing kit for proper drainage and adequate neutralizing agent

Was the inspection completed without any issues?

Turn off power to the boiler before starting maintenance

Ensure all safety warnings are understood

Check that all the parts are in place

Inspect air and vent termination screens for blockages or damage

Inspect condensate drain system for leaks or blockages

Inspect air vents for proper operation

Inspect magnetic separator for debris or damage

Turn off power to the boiler before any service operation

Ensure the boiler is inspected annually by a qualified service technician

Measure the hardness of the fill water (grains per gallon)

Is the hardness between 5 and 12 grains per gallon?

Measure the pH level of the fill water

Is the pH level between 6.5 and 8.5?

Measure the Total Dissolved Solids (TDS) in the fill water (ppm)