Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Lochinvar Boiler KBX0400-ON

Create an account to install this asset package.

Maintenance Plans for Lochinvar Boiler Model KBX0400-ON

Integrate maintenance plans directly into your work orders in MaintainX.

1 Monthly Boiler Check

Safety Precautions

Turn off power to the boiler before starting any service operation

Ensure all safety warnings are understood and followed

Check that all the parts are in place

Inspection and Maintenance

Inspect air and vent termination screens for blockages or damage

Inspect condensate drain system for leaks or blockages

Inspect air vents for proper operation

Inspect magnetic separator for debris or damage

Run this procedure

6 Monthly Flue Vent System and Air Piping Check

Safety Precautions

Turn off power to the boiler before starting any service operation.

Ensure all safety warnings and instructions in the manual are followed.

Flue Gas Venting System Inspection

Visually inspect the entire flue gas venting system for blockage, deterioration, or leakage.

Repair any joints that show signs of leakage.

Is the air inlet pipe connected and properly sealed?

Boiler Vent Discharge and Air Intake Verification

Verify that boiler vent discharge is clean and free of obstructions.

Run this procedure

Boiler Interior Check

Safety Precautions

Ensure power to the boiler is turned off before starting any service operation.

Verify that all safety warnings and instructions in the manual are understood.

Inspection and Cleaning

Remove the front access cover of the boiler.

Inspect the interior of the boiler for any visible damage or issues.

Vacuum any sediment from inside the boiler and components.

Remove any obstructions found inside the boiler.

Post-Inspection

Run this procedure

Pre-Commissioning Boiler Cleaning

Safety Precautions

Ensure all service and maintenance procedures are followed as per the manual and component literature.

Verify that the boiler is inspected annually by a qualified service technician.

Turn off power to the boiler before any service operation to prevent electrical shock.

System Preparation

Flush the entire heating system prior to fill and start-up.

Cleaning Process

Clean the entire heating system with an approved pre-commissioning cleaner (e.g., Sentinel X300 or Fernox F3) as per the manufacturer's recommendation.

Clean all water filtering devices in the system.

Run this procedure

Boiler Air Leaks Check

Warning: Follow the Service and Maintenance Procedures

Acknowledge understanding of the warnings and precautions

Pre-Inspection Safety Measures

Turn off power to the boiler

Ensure all system leaks are eliminated

Air Leak Inspection Areas

Check for air leaks in the following areas

Water Volume Monitoring

Enter the fresh water volume entering the system (as a percentage of system volume)