Lochinvar Boiler KBX0650L

Is the inspection being conducted by a licensed plumbing contractor or authorized inspection agency?

Inspection of Safety Relief Valve

Inspect the valve for signs of corrosion

Ensure the valve and discharge line have not been altered or tampered with

Remove and inspect the valve and its components

Reinstall the valve after inspection

Ensure all service and maintenance procedures are followed as per the manual and component literature.

Verify that the boiler is inspected annually by a qualified service technician.

Turn off power to the boiler before any service operation, unless otherwise noted in the instruction manual.

Freeze Protection Fluid Testing

Follow the freeze protection fluid manufacturer's instructions for testing.

Test the glycol concentration in the system.

Is the glycol concentration within the desired set points?

Adjust the glycol concentration if necessary and describe the adjustments made.

Follow the service and maintenance procedures in the manual and component literature.

Ensure the boiler is inspected annually by a qualified service technician.

Turn off power to the boiler before any service operation.

Warning: Follow the Service and Maintenance Procedures

Acknowledge understanding of the warnings and precautions

Ensure all system leaks are eliminated

Check for air leaks in the following areas

Enter the fresh water volume entering the system (as a percentage of system volume)

Follow the service and maintenance procedures in the manual and component literature.

Ensure the boiler is inspected annually by a qualified service technician.

Turn off power to the boiler before any service operation.

If leaks are found, was the boiler shut down and repaired immediately?

Vent any remaining air from the system using manual vents.