True Food Service Equipment Refrigeration Equipment TBR72-RISZ1-L-B-111-1

Ensure cabinet is installed in final location and correctly leveled

Check for gaps or openings between closed doors and cabinet

Adjust the roller using a 7/16" wrench or adjustable wrench and 1/8" Allen wrench

Verify that the doors are properly aligned after adjustment

Document any issues encountered during the adjustment

Ensure availability of required tools

Verify the cabinet is level and supported properly

Remove bolts securing the top hinge bracket to the front of the cabinet base

Swing the bracket onto the door and tilt the top of the door out for clearance

Ensure the side latch is not used before removing the slide door.

Position the doors as described below

Tilt the top of the door back until the rollers exit the door channel.

Swing the bottom of the door out of the bottom channel.

Remove the door cord from the roller bracket.

Ensure you have the following tools

Select the type of gasket for your unit

Carefully pull removable gasket away from the door from the upper right or left-hand corner

Apply silicone to each corner of the door/gasket channel

Push the gaskets back into their original tracks and press corners in

Unplug the refrigerator/freezer before cleaning or making any repairs.

Ensure temperature controls are set to the 0 position or powered off.

Replace component parts with OEM components

Was a licensed service provider used for servicing the unit?

Ensure no power is present in light circuits, perimeter heaters, and evaporator fans.

Verify the operator's health and safety measures are in place.